My Shopping Cart
Yanhua ACDP gm tech2 nexiq JMD Handy Baby ii sbb pro2 lonsdor JDiag obdstar vpecker wiTECH digimaster 3
Home
Home - Products - Technical Service - KESS V2 Problem after Update Solve Way
« Go Back

KESS V2 Problem after Update Solve Way

Matched Product
New V4.036 KESS V2 OBD2 Manager Tuning Kit No Token Limitation

New V4.036 KESS V2 OBD2 Manager Tuning Kit No Token Limitation   Item No. SE87

Latest price:US$259.00 Buy It Now:US$79.99 69% off    Free Shipping       Click Here to Shop
Kess V2 Following on the success of the tremendously stable and versatile Kess 1, this latest addition to the Alientech stable is probably the most advanced tool available today.
HOBDII.com Exclusive sales with best quality and unlimited technical service.

Photos

KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
KESS V2 Problem after Update Solve Way
Download

Description

Please NEVER Update this tool.
But if you met problems after update it, it can not work now. then you have to buy a new chip, it costs 18USD/PC without shipping. if you know how to change the chip, then we will just ship the chip to you, if you don't know how to change chip, then you have to send the main unit back here.
Note: Please NEVER Update this tool.
 
But if you met problems after update it, it can not work now. then you have to buy a new chip, it costs 18USD/PC without shipping. if you know how to change the chip, then we will just ship the chip to you, if you don't know how to change chip, then you have to send the main unit back here.




How to Solve KESS V2 Wake up error ?
 
If you get "Wake up error" when running Kess v2 as the following picture shows. you may want to know How to Solve KESS V2 Wake up error ?
 
If you get "Wake up error" when running Kess v2 as the following picture shows.




Possible reasons for wake up error: 
Kess v2 fails to read out TF card program or the program in the TF card is not working properly.
 
2 reasons for Kess v2 fails to read out TF card program. 

1) The four pins of chip are not soldered firmly on the main board.
2) The chip is loose for a long time of use.






Try to do as following instruction:

1) Solder the chip once more to make it tightly connected to the main board. 
2) Use a brush to clean up the shrapnel on the card slot
3) Lift up the shrapnel a little bit to make sure it can well communicate with the TF card, if the card slot shrapnel is not flexible enough.
4) you should Clean the TF card and then put it back to the card slot.





If the wake up error stays, format the card and then copy the software back to the card. 

It is easy 4 basic steps, pay attention to the important note.

1. Format TF card
2. Ask us to send you the software in the TF card
3: decompress the file, choose them all, copy and paste to TF card. (IMPORTANT NOTE: Don’t directly copy the compressed file to TF card; 
4:don’t create a new folder in TF card and copy decompressed file into it.)\




(1. Decompress file: kessv2 up)




(2. Copy the 4 files and paste to TF card)




(Wrong operation)
 
If the two above methods can not  deal with wake up error, you should reflash the CPU program, and then copy and paste the software to the TF card again. The procedure to reflash CPU is as the same as that to solve token limitation as the following link shows: 




 How to make your KESS V2 with unlimited tokens?

Here is the way to tell you how to program the tokens program of KESS V2 chip again and again, so that the chip can be used all the time.
1) Buy one LPC2478 chip to replace the original one for KESS V2. If your KESS V2 is the tokens recycling version, then token chip can be reprogrammed, no need to buy a new one.
2) Prepare for a LINK J-LINK V8 programmer





3) Weld the pin as the photo




4) Connect the JTAG programmer as the following photo:



5) Follow our video to program the chip. Here is the video for how to program the token chips. 

2, Some customer want to know if there is the user manual for how to connect the cable with the ECU, or which cable to choose to connect with the ECU. For kess v2, after you install the software ready, it will gives you the prompt. If your car is OBD port, just use OBD cable to connect this device with your car. If it needs special tool to connect, software will prompt you:



















the Problem some person meat: After ithey install the KESS V2 software ready, when open the software, it prompt me "Connectiong not established". Red light on KESS V2 is ON. 


Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
*Verification Code:
      7208    No right? Get a new Verification Code
 
Share your thoughts about this item with other users. All reviews will be reviewed within two working days, aggressive reviews and spam will be blocked.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.

Search

You can search Technical Service by keyword.