Here is the center of ECU Chip Tunning. We supplies ECU Chip tools which can read and program ECU the whole ECU content of eprom file (or ROM memory with maps if eprom physically not present). Here are xprog-m v5.0 programmer, KWP2000+, galletto 1260, BDM 100 Version 1255, kess obd tuning kit, SMPS MPPS v.220.127.116.11 EDC16 and so on. Those tools can support not only one or two brands, so Please DO NOT forget to leave message to tell what type and the year of your car, especially the car's ECU type to us. so that we can choose the correct ECU tool to fit your car.
HOBDII.com Supplies tools with unlimited technical service and one year warranty. For any problem, please feel free to contact us.
Orange 5 programmer is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers' requirements to read/write algorithms.
MultiFlasher is a chip-tuning software intended for reading/writing ECU's FLASH and EEPROM memory. It can use any adapter supporting J2534 standard, e.g. OpenPort 2.0 by Tactrix.
HexTag Programmer is the latest BDM tool released by Microtronik which can do a wide range of operations in multi car brands. It can read the ECU’s D-flash and P-flash in fraction of seconds which is faster compared to any tool in the market.
Xprog box latest version 5.84 comes with new authorization - AUTH-0028-1 Renesas V850 and AUTH-0028-2 Renesas SuperH
V2.13 KTAG K-TAG Firmware V6.070 ECU Programming Tool Master Version
1.100% J-Tag compatible, but in a completely different way.
2. The factory combiens Motorola BDM/Nexus and Bootloader Mitsubishi/Infineon Tricore/ST communication lines into a single J-Tag.
3.A true champion of innovation, K-TAG introduces another brand new novelty to Alientech world: J-Tag communication for Asian vehicles.
This is a famous chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode Tricore, checksum. This item cannot only work as FGTech Galletto 4-Master, but can also work for BDM-TriCore-OBD.
The New Genius is the world’s first Touch & Map device which allows reading / programming the ECU in modern vehicles over OBD2.It is able to work without connection a computer during the critical phases of reading and writing of the ECU, ensuring the process is executed in complete safety.
KTAG V7.020,Software version: V2.23,supports ECU Type: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU,Toyota 76F, and so on, at least 100 more ECU Types added.No tokens limitation.supports all the functions for KTM100 KTAG V7.003
Newest Firmware V10.05 CARPROG, with All 21 Adapters, contain much more authorization than V4.74 or other low version CARPROG. Packed with both software V10.05 and V9.31, software V10.05 needs activation but you will automatically get token renew after it used up.
CARPROG FULL Main Unit, do not contain any cables.Is for those customer whose main unit broken, can directly buy a new one to replaceit.
HOBDII.com supplies with unlimited technicial service and one year warranty.
V2.47 Kess V2 OBD2 Manager Tuning Kit Auto Truck ECU Programmer,is able to connect to internet! Supports online service!supports more 140 types of vehicles and protocols than KESS V2 V4.036
1. NO LIMITS of the car model and year + NO NEED disassemble ECUs Read and write Bosch ECUs (Infineon's chips) incl. flash and eeprom
2. LESS RISK to clone/copy ECUs Able to modify data or do chip tuning to achieve superior performance
3. MUCH CHEAPER, compared with the same functional tools The price is 1/10 of other programming tools in the market
BMW Carsoft 6.5 MCU controlled Interface which is compatible with the original interface. Fully digital line switching and MCU controlled service reset timing.
HOBDII.com offers with unlimited technical service and one year warranty.
Latest Version X-PROG Box ECU Programmer XPROG-M V5.50 online hot sale. It is a continuation of the project XPROG and now supports more than 450 units (serial EEPROM's, Microcontrollers (MCU), Electronics Control Units (ECU), DashBoards, Immobilizers, Calculators and others).
Read the chip data, read and write ECU data, read gearbox data etc at a high speed.
V2.23 KTAG ECU Programming Tool Master Version with Hardware V7.020
Latest software V2.23 with newest hardware version V7.020
Available Protocols for K-TAG: BDM MOTOROLA MPC5xx
Operation convenient, automatically recognize ECU model, high stability.
This is newest version of XPROG-M ECU Programmer, XPROG-M V5.5.5 is the only tool can decryption BMW CAS4. The package come with T420 laptop, Hard disk and USB Dongle. Software is preinstalled, you can directly use when you receive the package.
Online Version Kess V2 Firmware V5.017 support online service, can work with interent, no tokens need, newly add 140+ protocols. program safer and more stable!
UPA USB 2014 is with software V18.104.22.168, and support English Language.
Online EU RED KTAG 7.020 K tag V7.020 V2.25 Online Master KTAG V7.020 K-TAG ECU Chip Tuning For Car Truck