Adb lue Emulator Box is designed to disable Adb lue system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates. Adb lue Emulator Box bypasses electronic module of the Adb lue system on vehicle.
HOBDII.com offers with free shipping to worldwide, one year warranty and unlimited technical service.
The minusblue module and the original Adb lue module CANNOT both be activated at the same time, the GREY ACTIVATION WIRE(+30) is to enable the minusblue module working.
It is important to connect the GREY ACTIVATION WIRE(+30) to a 24V source always available(battery), moreover, the soldering operation must be done between the 20A fuse(F738) and the existing Adb lue module.
If you want to stop and exclude the original Adb lue module from working, all that needs to be done is to remove the F738 fuse before starting the engine.
The minusblue module will automatically be activated. To re-instate the original Adb lue module, all that needs to be done is to reinstall F738 fuse before starting the engine. The minusblue module will automatically be de-activated.
When the minusblue module is fully connected to the electrical circuit of the original Adb lue module, and after identification of the F738 fuse controlling the power feeding to the original Adb lue module the truck batteries can be Re-connected.
The minusblue module aquires the inputs from the CANBUS the first time the dashboard is turned on(key on but engine still off).
1) Make sure the F738 fuse is inserted.
2) Turn on the dashboard(key on) and verify that the red led is on.
3) After approx 1 minute the red led will turn off and the green led will Turn on.
4) Switch off the dashboard(key off).
After this procedure the minusblue module will be activated whenever the dashboard is turned on(key on).
The result will be:
1) If the F738 fuse is installed the original Adb lue system will be working. Both red and green leds will be on.
2) If the F738 fuse is not installed the original Adb lue system will not be working and the minusblue module will be activated. Both red and green led will be flashing.
NOTE: ALL THE OPERATIONS WITH THE F738 FUSE MUST BE DONE WITH THE DASHBOARD SWITCHED OFF(KEY OFF).
LED FUNCTION ON - OFF
KEY OFF:- RED OFF, GREEN OFF - NO POWER FEEDING.
KEY ON:- RED OFF, GREEN OFF - TRUCK NOT SELECTED.
KEY ON:- RED ON, GREEN OFF - WAITING FOR SELF-LEARNING.
KEY ON:- RED OFF, GREEN ON - LEARNING COMPLETED.
KEY ON:- RED ON, GREEN ON - DATA SAVED, MODULE NOT ACTIVATED.
KEY ON:- RED PULSE, GREEN PULSE - DATA SAVED, MODULE ACTIVATED
When this box connected - Adb lue system of the truck would be fully emulated, no errors related to Adb lue.
The box can be fast and easy installed to truck. You can disconnect it, reset and install into another truck.
BMW AT-200 ECU Programmer & ISN OBD Reader Plus CGDI Prog BMW MSV80How to make purchase on HOBDII.com?
For any questions, please feel free to contact us. Our email is 7/24 available, here is our contact information:
Scan HOBDII QR code to order anywhere and anytime by mobile phone