Cheap V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit
Some Important Tips for Using Digiprog 3:
1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
3. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned 4. completely as the solvent can damage the clips.
V4.93 digiprog 3 odometer programmer:
For Audi :
A3 Diag new version
A6 Diag new version
A8 Diag new version
For Mercedes :
R 172 Diag new version
R 231 Diag new version
W 212 Diag new version
For Ford :
For VW :
Amarok Polo Johnson
V4.94 Digiprog3 Odometer Master Programmer Feature:
1. Power-On Password:1
2. Newest Version: V4.94
3. Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.
4. Worldwide leader in digital speedo programming and correction software.
5. Quality standards are second to none.
6.Years of experience in digital vehicle engineering.
7. Professional technical service.
Digiprog 3 V4.94 Other Features:
1. Service interval adjustments and settings
Fault memory read-erase
Integrated PC communication
Digiprog 3 Menu:
1. EEPROM Menu
The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.
2. CAR/TRUCK Menu
This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.
3. Motorcycle Menu
This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.
4. Special Functions Menu
The special functions menu is for use only by official DigiProg dealers.
5. Setup Menu
This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles.
Using the EEPROM Menu:
On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started.
The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.
Digiprog III V4.94 Screen Display:
1pc x Digiprog3 Main Unit
1pc x OBD2 Cable
1set x Cables and Adapters
Shipping & Delivery On Hobdii.com
1) Ship From Shenzhen.
2) For EU Countries and United States Customer, Ship From US, UK, Czech, Amazon US Warehouse:
|Power- on password||1||No need password|
Deutsch, English, Espanol, French,
Portuguese,Italiano, Turkish, Nederlands
|Way to change mileage||By OBD2 or dashboard||By OBD2 or dashboard|
Users are not allowed to update by
themselves (Need to update by update email of
or send the interface back to update.)
Original and update online by
users anywhere anytime, and one
year free update.
For universal car, but cover less vehicle
models than( digimaster 3. Cannot do well
For Ford, For Benz, BMW, Opel , digimaster 3
The Best odometer tool for universal car,
such as it can change mileage For ford,
BMW, Toyota, Benz, VW, Audi,Volvo,
Renault,Peugeot and high-end cars.
Covers vehicles from 1996 to 2013(some
can do 2014 year) the vehicle year it covers differs one from the other based
on specific vehicle
Covers vehicles from 1996-2014,
the vehicle year it covers differs one from
the other based on specific vehicle.
|Tokens||No tokens limited||
Item No.SP78 no token limitation,
Item No.SP78-B with 980 Tokens
Mainly for setting and programming
odometer correction, Audio
decoding, airbag resetting engine ECU resetting, IMMO,
programming key for Benz &BMW etc
If you want one mileage correction device to do most normal brand cars, you can choose Digiprog3 is enough.But for the new and high-end cars,
you need to use Digimaster 3.
At the same time, if you want to choose one multi-function mileage correction,
the Digimaster 3 is the best choice. Digimaster 3 contains the advanced technology
of programming new keys for BMW and Benz, CAS-BDM reading/writing and resetting;
35080V6 erasure etc.