GM Tech2 Connection With Candi Interface:
GM Tech2 Connection Without Candi Interface:
GM TECH2 Features:
1.This package comes with one memory card and contains one software, if you need use other software, you need buy additional 32MB memory card.
2.This version GM TECH2 with Carton package, shipping weight only 3.15KG, save lots of shipping cost also make your customs clearance much easier.
3.If You Need Storage Case, Please Buy SP23-B
Five Reason To Get GM Tech2 GM Diagnostic Scanner:
1. Can be Updated by 32mb card.
2. Support multi-language: English, Italian, French, Portuguese, German, Spainish, Korean, Japanese, Thai, Chinese
3.GM TECH2 can do diagnose for 6 cars: GM/ SAAB/ OPEL/ SUZUKI/ ISUZU/HOLDEN
4. Year Coverage of Diagnosis: From 1992 to 2014, With Help of Tis2000 Software, It Can Do Programming for Cars Before Year 2007
5. It Can Only Support GM Cars, No Trucks
1) GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru current year.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech 2 Specifications
1) Microprocessor: 32 bit,16 MHz
2) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
3) Communications: Integral RS232 communication port.
4) Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface;
You will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter.
Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.
Difference between GM tech 2 serials and GM MDI
||GM Tech 2 SP23, SP23-B, SP23-B3, SP23-C
||GM MDI SP163
||GM-English, German, Spanish , Japanese, French, Thai , Portuguese, Korean
OPEL-English, Italian , German,Spanish
|Multi-language: English, French, German, Japanese, Italian and so on.
Total 30 languages to choose.
||Via 32MB Software Card
||can not update
||no need active
||cannot plug original software card, but can support original program
||can support software from original factory
||no need connect to the PC
||Win XP only
||no need connect to the PC
||can not connect to the internet then install the software, because once connect internet, it will remind you update the software
|Support Car Model
||Cannot support truck, only for cars, Support all GM systems 1992 thru current year. such as GM/ SAAB/ OPEL/ SUZUKI/ ISUZU/HOLDEN
||MDI can test all GM car from 1990-2012 year.
||support reprogramming, but need to use with TIS2000 together
||support offline program,such as chevrolet,opel, but not for all cars
GM-English 32.008 1991-2013
GM-Germany 32.008 1991-2013
GM-Spanish 32.008 1991-2013
GM-Japanese 32.008 1991-2013
GM-French 32.008 1991-2013
GM-Thai 32.008 1991-2013
GM-Portuguese 32.008 1991-2013
GM-Korean 32.008 1991-2013
OPEL-English V165 1997-2014
OPEL-Italian 133.001 1997-2012
OPEL-Germany 85.001 1997-2008
OPEL-Spanish 91.001 1997-2009
HOLDEN-English V149 1999-2013
ISUZU-English CAN-BUS 107.021 2010- (CAN-BUS support car models after 2010)
ISUZU-English K-Line 11.62 1996-2013 (K-line support car models from 1996 to 2011)
(If you want ISUZU software, please tell us you want CAN-BUS or K-line)
GM vehicles utilize the CAN interface
05 Buick Allure (3.6L)
05 Buick LaCrosse (3.6L)
05 Buick Rainier (5.3L)
04-05 Buick Rendezvous (3.6L)
04-05 Cadillac CTS (3.6L)
04-05 Cadillac SRX (3.6L / 4.6L)
04-05 Cadillac XLR (4.6L)
05 Cadillac STS (3.6L / 4.6L)
05 Chevrolet Cobalt (2.2L)
05 Chevrolet Corvette (6.0L)
05 Chevrolet Equinox (3.4L)
05 Chevrolet TrailBlazer (5.3L)
05 Chevrolet SSR (6.0L)
04 Chevrolet Malibu (Body/Chassis only)
05 Chevrolet Malibu (3.5L)
05 GMC Envoy (5.3L)
05 Pontiac G6 (3.5L)
05 Pontiac GTO (6.0L)
05 Pontiac Pursuit (2.2L)
Tech-2 Flash Tester
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
TIS 2000 CD
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
RS232 cable and user`s manual
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet download (199.2 kb)