GODIAG GT100 is a latest testing platform for OBDII protocol communication detection and ECU maintenance, diagnosis, programming & coding. It can convert the car OBD2 interface into 6 pin for signal detection and electrical level conversion.
1. OBDII Protocol Detector & communication detection
GODIAG GT100 AUTO TOOLS OBD II Break Out Box ECU Connector
GODIAG GT100 Highlights
What can GODIAG GT100 AUTO TOOLS OBD II Break Out Box ECU Connector do for me?
- US/UK/EU Ship,No Tax.1 year warranty.
- Used with KESS V2 and Ktag
- ECU connection + OBDII Protocol Detector
- The cable can be extended, with Optional dedicated adapter
- Convert OBD1 diagnostic interface to the standard OBD2 diagnostic interface
- Compatible with tools from LAUNCH, AUTEL, FOXWELL, XHORSE, VXDIAG and so on
- Used with BMW-CAS4 Adapter test platform to detect whether the CAS4 key programming work perfectly or not
1.GODIAG GT100 is a latest testing platform for OBD2 protocol communication detection and ECU maintenance / diagnosis / programming / coding.
It can be connected to single or multiple modules of the vehicle.
GT100 has strong compatibility.it can be connected with any car diagnostic tool.
4. Able to power the car when replacing the used battery.
Please choose in Version according to the voltage of your local place.
GODIAG GT100 Connection Diagram:
1). Connect GODIAG GT100 to the OBDII diagnostic port of the car.
2). When the device displays the voltage, turn on the power switch of GODIAG GT100.
3). Then connect to the diagnostic tool, when the tool is communicating with the car, the LED indicator of corresponding protocol will light up or flash. ( If the CAN protocol is detected, it will have the maximum brightness. When the communication is successful, the corresponding CAN-H and CAN-L will dim or twinkling weakly)
2. ECU connection: single module connection
GODIAG GT100, connected to a single ECU module, is convenient for a user to do the single-module diagnosis and programming.
1). Connect the ECU with the color jumpers. (If the ECU is CAN protocol, please check whether you will need to connect a 120 ohm resistor.)
2). The Godiag GT100 can be powered by connecting to the OBDII diagnostic interface of car, or by an AC power adapter.
3). To diagnose and program for a single ECU by connecting the diagnostic tool or ECU programmer.
3. Banana plug extension connection:
Extend the car's OBDII 16pin interface to tell you whether the OBDII interface connection is good or not, which is convenient for the test of OBDII interface voltage waveform.
4. Convert OBD1 diagnostic interface to the standard OBD2
Use the connector to convert the OBD1 interface into obd2 interface according to the diagnostic interface communication protocol.
5. Connect multiple ECU control modules at the same time, which is convenient for the professional engineers to detect and maintain.
6. When to use the extension cables:
The space of the diagnostic interface location is too narrow to connect to the diagnostic tool, or the user find that the diagnostic cable is not long enough during maintenance. It can be extended by 1.2 meters.
7. Able to power the car when replacing the used battery.
1). Prepare battery A to supply power by connecting to No. 16 / 4 / 5 holes of Godiag GT100 & to the OBD2 diagnostic interface of the car.
[Notice 1. Turn on the power switch of Godiag GT100. 2. Don't turn on the ignition switch, don't start the car.
2). Then replace the brand-new battery B with the used battery in the car, which will ensure that the car has fully power to prevent data loss and audio lock-up or the malfunction due to lack of power to the ECU control module.
8. The dedicated adapter will be released (help GT100 connect to the special ECU module)
Hardware Connection Diagram:
Godiag GT100 Parameter
GODIAG GT100 function and operation guide
- By connecting the vehicle and diagnostic tool via OBDII, Godiag GT100's LED will indicate whether the OBDII diagnostic interface has a good communication with the car.
- Monitor the voltage of vehicle OBDII interface and display it in real time. If it is less than 11V, please stop the diagnosis and programming to avoid the vehicle being unable to start/data loss/module locked.
|1. Manufacturer custom
2. SJE1850 wire
3. Manufacturer custom
4. Power grounding
5. Signal grounding
7. ISO9141-2&iso, DIS4230-4K wire
8. Manufacturer custom
|9. Manufacturer custom
10. SJE1850 wire《bus->
11. Manufacturer custom
12. Manufacturer custom
13. Manufacturer custom
15. ISO9141-2 & ISO/DIS 4230-4L wire
16. Car battery positive
|Work and power
||Input AC100v-240v, Output DC12V 1A
|Operating temperature range
||-20 to 70 °C ( -4 to 158 °F )
|Storage temperature range
||-40 to 85 °C ( -40 to 185 °F )
||L: 23cm, W:18cm, H:7cm
1pc x Host
1pc xOBD 2-in-1 extension cable
1pc xColored jumper cable
1pc xPower supply 12V
1pc xResistance 120 ohm
6pcs xBanana plug
24pcs xWire accessories, Dupont 2.54mm connector female pins
Shipping & Delivery On Hobdii.com
1) Ship From Shenzhen.
- DHL Shipping: 5-8 working days, To help you clearance we will help declare a lower price on the invoice to help clearance. If address is remote area, you need pay remote freight or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
- Yanwen Express: 7-12 working days, usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers. (Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us ,thank you :)
- EMS Shipping: When the address is remote area to DHL, we will send the package by EMS. And it will take a bit longer, about 7-15 working days to arrive.
- Fedex Shipping: Usually, we will not use this shipping method, if you have special requirements, please contact us.
- Standard Flat Rate Shipping Service: Usually orders below US$150will be shipped by post, it will take about 10-20 working days via Flat air mail: China post & Yanwen ePacket
2) For EU Countries and United States Customer, Ship From US, UK, Czech, Amazon US Warehouse:
USA/UK Ship Items
- US/UK Ship: Item title marked "US/UK Ship" or "Ship from US/UK"usually in stock in the US/ UK warehouse and we will send from US/UK by default. If the item is out of stock, we will ship from Shenzhen for you by default.
- We newly added Czech warehouse, ship to EU countries with fast delivery & no tax in 3-5 working days. It is more convenient for you. Free TAX, faster shipping with cheaper price.
If you have any questions on the delivery or you need a better price , you can contact us freely via: